Training: operators, crews and engineers learning on the systems they will run. The loop, step by step: 1. A classroom, a practice mast and a weather station. 2. Sensor, link, edge and console stand ready. 3. Learners read the station and note the values. 4. Each reading is stamped with time and place. 5. They trace data from the mast to the rack. 6. Relays carry the packets without reading them. 7. The edge verifies every signature first. 8. The rack shows how the reading is stored. 9. Only a confirmed result leaves the edge. 10. They climb and align a practice antenna. 11. Instruments confirm the response took effect. 12. Their results appear on the class screen. 13. The alert arrives with its evidence attached. 14. The whole chain is archived for audit. 15. Everything settles back to idle.

01 / 15

A classroom, a practice mast and a weather station

Nexus Observatory

Training and enablement

Your team runs it. We make sure they can.

Operator, crew and engineer training on the systems you own, commissioning taught on your own site, enablement for integrators and suppliers, and learning paths from first principles to a commissioned site, each step recorded.

Plan with usReference architectureThe open protocol

At a glance

Your team runs it; we make sure they can

Training and enablement teaches operators, crews and engineers on the systems you own, commissioning on your own site, integrators and suppliers on one practice, and learning paths from first principles to a commissioned site. Every course is built around the equipment, records and procedures of your own network.

Tatizo

Systems outlive the people who installed them

Networks run for years; staff change. A system only the vendor understands is a system you rent forever, and one that degrades the day the vendor leaves. Training is how a network stays yours, and how its quality survives staff changes, contracts and years.

Components

Pole-mounted edge gateway node
Automatic weather station (AWS) to WMO siting practice
Particulate monitoring station and sensor node
Seismometer vault station (broadband, solar powered, GNSS-timed)
LoRaWAN gateway, endpoint and soil probe
Deployable field shelter with environmental control
Data hall row pair with cold-aisle containment
Operations console with a video wall

Interfaces

Vyombo: SDI-12 · RS-485 / Modbus RTU · 4–20 mA
Radio: Ethernet · LTE-M / NB-IoT · LoRaWAN
Time and position: GNSS 1PPS
Security: TPM 2.0
Publishing: MQTT

Where it works

Integrators and suppliers, on one practice

In the story below

The system, part by part
Assembly
Installation
Deployment
Connections
Operation
Failure and recovery
Scale and federation
What you get

Scenes · 17

Next steps

Start a learning path Plan a deployment Talk to sales See Field crews

Tatizo
Systems outlive the people who installed them
Networks run for years; staff change. A system only the vendor understands is a system you rent forever, and one that degrades the day the vendor leaves. Training is how a network stays yours, and how its quality survives staff changes, contracts and years.
What it does
Your team runs it; we make sure they can
Training and enablement teaches operators, crews and engineers on the systems you own, commissioning on your own site, integrators and suppliers on one practice, and learning paths from first principles to a commissioned site. Every course is built around the equipment, records and procedures of your own network.
Hands on
Learning on the base node
Trainees take apart and rebuild the base node: power, inputs, radio, enrolment and updates, until the procedure is routine. Working on the real equipment builds the confidence to handle faults, not just routine visits. The same unit appears on every site they will visit.
The system
One station, part by part
Before anything is installed, the station is laid out as its parts: instrument, logger and edge compute, secure element, GNSS timing, radio, power, enclosure, wiring, earthing, mast and foundation.
Assembly
Built and tested before it ships
Each part is fitted to the pole and the enclosure, wired through surge protection to one earth, powered and bench-tested until it signs its first reading.
Deployment
Site after site, one design
The same station goes in at every site on the plan, each commissioned against the same checklist, until the field is covered.
Wiring
Signal, power and time, wired
Inside one site the instrument’s signal pair runs to the logger, solar charges the battery that feeds the load, GNSS time reaches the clock and the logger hands its records to the radio.
Partner enablement
Integrators and suppliers, on one practice
Partners learn the same methods and records, so work done by any of them meets the same standard. Partners are assessed on the same tasks as our own crews, and their records sit in the same system. Partner work is audited like ours.
See Partner enablement
Connections
Backhaul, time and power
The relay carries every site to the edge over a point-to-point link, the grandmaster’s time reaches every clock, and each site keeps its power through the night.
Engineers
Design, integration and the protocol in depth
Engineers learn how the data path, timing and trust work end to end, so they can design new sites and integrate new instruments themselves. They leave able to explain every step of the chain to a colleague, an auditor or a regulator.
See Engineers
Access
Access follows competence
Access to consoles, sites and procedures is granted according to recorded competence, and withdrawn when a qualification lapses. That way the people who touch the network are always the people trained for what they do, and an auditor can see it in the records.
Rekodi
Competence, recorded
Each person’s training and assessed tasks are recorded, so the site record shows who is cleared to do what. Records follow each person across sites and employers, so competence is never lost when people move. Assessments are practical, repeated and recorded.
See Learning paths
Waendeshaji
Run the grid, read the evidence
Operators learn to read the fleet console, handle alerts with runbooks and interpret the evidence behind every reading. Training uses the same console and records operators will use every day, so nothing is learned twice. They also learn when to escalate, and to whom.
See Operators
Field crews
Install, commission and maintain, on site
Crews train on the equipment they will maintain, following the same checklists and records they will use on real visits. Every procedure taught is the one written in the site record, so practice and training never drift apart. Assessment is practical, on real equipment.
See Field crews
How it scales
Train the trainers
Each programme builds local instructors, so capability grows with the network and stays in the region after we leave. Instructors are assessed and supported, and their courses use the same material as ours so the standard holds. Local instructors keep the courses current.
What you get
Academy paths, on-site enablement
Academy paths, guides and the glossary are open. Operator and technician training and on-site enablement are contracted; pricing follows the people trained and the sites involved, and the material remains available to your team. Courses can run on your site, at ours or remotely for the theory, with the practical parts always on real equipment.
Start a learning path Talk to sales
Next step
Start a learning path
Start with a learning path, or tell us who needs to run what. We plan the training around your site. We start from the roles you need to fill and the systems they must run, then build the plan around your site and calendar.
Start a learning path Plan a deployment

See it from every side.

Each opens as a full-screen presentation: deeper pages on the same subject, explainers, stories, guided tours of the places, network scenes and the observatories that came before.

All presentations