Skip to content
Skip to contentNexus Observatory

Grandmasters and holdover: the clock keeps time from its oscillator when the sky goes dark. The loop, step by step: 1. A grandmaster, its antenna and a rack of radios. 2. Sensor, link, edge and console stand ready. 3. Satellite time disciplines the oscillator. 4. Time and place are fixed to every sample. 5. The antenna loses its view of the sky. 6. The edge verifies every signature first. 7. The grandmaster switches to holdover. 8. Only a confirmed result leaves the edge. 9. The oscillator keeps phase within the limit. 10. Instruments confirm the response took effect. 11. The rack still receives one clean beat. 12. Relays carry the packets without reading them. 13. Operators see the drift budget count down. 14. The console shows the evidence with the alert. 15. Record, proof and action are archived together. 16. The sky returns and the clock re-locks.

01 / 16

A grandmaster, its antenna and a rack of radios

Nexus Observatory

/

Positioning, navigation and timing

/

Grandmasters and holdover
Reference clocks that keep time when the sky goes dark.

Grandmasters and holdover, inside Positioning, navigation and timing: PRTC and enhanced PRTC, primary reference clocks for frequency, atomic and quartz oscillators, holdover design and more. Every item is traced to its specification, from ITU-T G.8272 (PRTC) to ITU-T G.8272.1 (ePRTC), and runs on the open Observatory Protocol.

Plan with usArchitectureThe protocol
Technologies
7
At the frontier
0
Protocol functions
3 of 12
Industries served
6

At a glance

PRTC and enhanced PRTC

GNSS-traceable time references at 100 ns or 30 ns accuracy that anchor a timing network. In grandmasters and holdover, part of Positioning, navigation and timing, the grandmasters, reference clocks and holdover layer holds PRTC and enhanced PRTC, drawn against ITU-T G.8272 and ITU-T G.8272.1 and used beside traceability to national time scales on the same sites.

Tatizo

Reference clocks that keep time when the sky goes dark

Positions drive autonomous trucks; timestamps order every event in a network. When a receiver is jammed or spoofed, both can be wrong while looking perfectly normal. Integrity has to be designed and measured, because a degraded signal rarely announces itself to the systems that depend on it.

Key facts

Specification
ITU-T G.8272 (PRTC) · ITU-T G.8272.1 (ePRTC)
Specification
ITU-T G.810 (definitions and terminology) · ITU-T G.8260 (time and phase metrics)
Specification
ITU-T G.8272.1 (ePRTC with autonomous time reference) · ITU-T G.811.1
Specification
ITU-T G.8273.2 (holdover performance) · ITU-T G.8272.1
Specification
ITU-T G.811 · ITU-T G.811.1 (ePRC)

Components

  • PTP grandmaster clock with GNSS antenna
  • Robotic total station in a monitoring shelter
  • Slope stability radar on a trailer
  • Haul truck with onboard network and autonomy kit
  • Private LTE mast on a solar skid
  • “AI tower in a box”
  • Data hall row pair with cold-aisle containment
  • Operations console with a video wall

Interfaces

Time and position
PTP (IEEE 1588) · GNSS 1PPS · NTP

Where it works

  • Timing performance monitoring
  • Holdover design

In the story below

  1. The system, part by part
  2. Assembly
  3. Installation
  4. Deployment
  5. Connections
  6. Operation
  7. Failure and recovery
  8. Scale and federation
  9. What you get

Scenes · 13

Next steps

Plan a deploymentOpen the Field Deployment StudioSee Positioning, navigation and timingTalk to sales

  1. Positioning, navigation and timing · Grandmasters and holdover

    Reference clocks that keep time when the sky goes dark

    Positions drive autonomous trucks; timestamps order every event in a network. When a receiver is jammed or spoofed, both can be wrong while looking perfectly normal. Integrity has to be designed and measured, because a degraded signal rarely announces itself to the systems that depend on it.

  2. What it does

    PRTC and enhanced PRTC

    GNSS-traceable time references at 100 ns or 30 ns accuracy that anchor a timing network. In grandmasters and holdover, part of Positioning, navigation and timing, the grandmasters, reference clocks and holdover layer holds PRTC and enhanced PRTC, drawn against ITU-T G.8272 and ITU-T G.8272.1 and used beside traceability to national time scales on the same sites.

    Specification
    ITU-T G.8272 (PRTC) · ITU-T G.8272.1 (ePRTC)

  3. Grandmasters

    Timing performance monitoring

    Measuring time error, MTIE and TDEV across the network to catch degradation early. In grandmasters and holdover, part of Positioning, navigation and timing, the grandmasters, reference clocks and holdover layer holds timing performance monitoring, drawn against ITU-T G.810 and ITU-T G.8260.

    Specification
    ITU-T G.810 (definitions and terminology) · ITU-T G.8260 (time and phase metrics)

  4. Grandmasters

    Atomic and quartz oscillators

    Caesium, rubidium, chip-scale atomic and oven-controlled quartz oscillators chosen by holdover needs. In grandmasters and holdover, part of Positioning, navigation and timing, the grandmasters, reference clocks and holdover layer holds atomic and quartz oscillators, drawn against ITU-T G.8272.1 and ITU-T G.811.1.

    Specification
    ITU-T G.8272.1 (ePRTC with autonomous time reference) · ITU-T G.811.1

  5. Grandmasters

    Holdover design

    Keeping time within budget for hours or days when GNSS is lost. In grandmasters and holdover, part of Positioning, navigation and timing, the grandmasters, reference clocks and holdover layer holds holdover design, drawn against ITU-T G.8273.2 and ITU-T G.8272.1. We build it into every site for grandmasters and holdover against that standard, and keep its version and its test results on the site’s record.

    Specification
    ITU-T G.8273.2 (holdover performance) · ITU-T G.8272.1

  6. Time and place

    When and where, on every record

    Every record made for grandmasters and holdover carries its time, from a clock disciplined by satellite time or a PTP grandmaster, with the position and siting record of the station that made it. When time or position degrades, the record for grandmasters and holdover says so, and every user downstream sees the same warning.

  7. Grandmasters

    Primary reference clocks for frequency

    Frequency references for SyncE and legacy networks. In grandmasters and holdover, part of Positioning, navigation and timing, the grandmasters, reference clocks and holdover layer holds primary reference clocks for frequency, drawn against ITU-T G.811 and ITU-T G.811.1 and used beside edge and distributed grandmasters on the same sites.

    Specification
    ITU-T G.811 · ITU-T G.811.1 (ePRC)

  8. Imani

    Proved before it is trusted

    A node joins a network for grandmasters and holdover only after its hardware root of trust answers an attestation challenge. Its keys stay in secure hardware, its software arrives signed and every record it makes for grandmasters and holdover carries a signature, so anyone downstream can check where a value came from.

  9. Ushahidi

    Traced to its specifications

    We trace each part of grandmasters and holdover to its specification: ITU-T G.8272, ITU-T G.8272.1 and ITU-T G.811. We keep the versions, configurations and test results of grandmasters and holdover as signed records, so a buyer or an auditor can check what was delivered against what was specified.

    Viwango
    ITU-T G.8272 · ITU-T G.8272.1 · ITU-T G.811 · ITU-T G.811.1

  10. Taarifa mpya

    Updates in rings, with rollback

    Software and configuration reach a fleet for grandmasters and holdover in rings: one canary site first, then a few, then all, each ring gated on health and data completeness. A failed gate stops the wave, and each node for grandmasters and holdover returns to its last good release without a site visit.

  11. How it scales

    One base unit, repeated

    A network for grandmasters and holdover starts with one base node and the instruments it reads. A station adds power and radio, a site adds a relay and a fleet repeats the proven site, so capacity for grandmasters and holdover grows by adding units, never by replacing what works.

  12. What you get

    Timing and positioning integrity

    PTP grandmasters with GNSS holdover, interference detection and timing monitoring for networks and instruments. For grandmasters and holdover, it goes to carriers, utilities, financial infrastructure and observatories as hardware and software or a managed service, sized to the sites they run.

    Talk to sales

  13. Next step

    Grandmasters and holdover, planned with you

    Tell us the sites, the systems grandmasters and holdover must work with and the outcome you need, with a map or a list of addresses if you have one. An engineer replies with a survey proposal, a design and a scope for grandmasters and holdover, and the plan grows from one site to the network you need.

    Plan a deploymentOpen the Field Deployment StudioSee Positioning, navigation and timing

More presentations

See it from every side.

Each opens as a full-screen presentation: deeper pages on the same subject, explainers, stories, guided tours of the places, network scenes and the observatories that came before.

All presentations

In depth

Use case Highway corridor coverage and safety sensingUse case Utility grid-edge private LTE and wildfire weatherUse case Wildfire camera and fire-weather nodeUse case Avalanche detection site

Explainers

Explainer · Environment and climate Environment and climate — SectorsMethane fencelines, acoustic biodiversity grids, flux towers, river sondes and smoke networks: an interactive explainer with the method behind every number.Explainer · Communities and rural Communities and ruralCommunity cellular coverage on real terrain, fixed-wireless Fresnel clearance, corridors, a remote microgrid sized from its load and interim public-safety broadband.Jukwaa Positioning, navigation and timingA wrong timestamp is a wrong answerJukwaa Edge compute & AIThe archive is too late

Stories

Story · Timing and PNT Time as infrastructureA 5G cell must hold its phase within 3 µs of its neighbours, ±1.5 µs of a common reference; a synchrophasor’s one per cent vector error leaves room for only…Story · 6G and sensing Networks that senseThe framework for 6G names integrated sensing and communication as one of its usage scenarios: the same radio that carries data also measures range,…Story · Mountains and avalanche terrain Snowpack, slope and signalAvalanche forecasting reasons about the likelihood and size of avalanches on given terrain. The observations behind it come from a few stations in hard…

Places and networks

Guided tour · Guided 3D tour Orbit viewGround tracks of a sun-synchronous imager and three shells of a broadband constellation, computed from their orbits over a rotating Earth.Guided tour · Guided 3D tour Arctic stationA self-powered station on the ice: a microgrid, a low-orbit satellite terminal, a weather station, a GNSS monument and an edge node that holds data through the polar night.Guided tour · Guided 3D tour Offshore and oceanA moored met-ocean buoy and a profiling float report through a satellite pass overhead; the red link is the uplink.Network scene · Private 5G · Port Private 5G at a container portSmall cells on the yard lighting masts and a sector site on the operations building serve remote-controlled cranes and trucks among steel container stacks.Network scene · NTN · Satellite Satellite direct to device in a mountain valleyWhere the valley cell cannot reach, phones on the pass road connect straight to a low-orbit satellite, which relays through its feeder link to a gateway.

Heritage observatories

Heritage observatory · China · 132 Zhang Heng’s seismoscopeIn 132 CE a court astronomer presented a bronze urn that, it was recorded, told the capital of an earthquake no one in Luoyang had felt. No original survives.Heritage observatory · United States · 2009 Ocean Observatories InitiativeCabled and moored arrays in the Atlantic and Pacific, designed to give scientists a continuous, real-time view of the ocean for decades.

Interactive tools

Interactive tool · Configure a station Station BuilderConfigure a station part by part in 3D, check the rules as you go and request a quote for the assembly.

01Ni nini

Grandmasters, reference clocks and holdover.

The shared foundations every network and sensor depends on: how spectrum is licensed, shared and monitored, GNSS positioning and its corrections, packet timing with PTP and SyncE, grandmasters and holdover, resilient PNT alternatives, and the detection of interference, jamming and spoofing. Each technology below carries what it is, what we do with it, and the standard it is drawn against.

Spectrum, timing and PNT

PRTC and enhanced PRTC

GNSS-traceable time references at 100 ns or 30 ns accuracy that anchor a timing network.

We design, deploy, operate and maintain.

ITU-T G.8272 (PRTC) · ITU-T G.8272.1 (ePRTC)

Spectrum, timing and PNT

Primary reference clocks for frequency

Frequency references for SyncE and legacy networks.

We design and deploy.

ITU-T G.811 · ITU-T G.811.1 (ePRC)

Spectrum, timing and PNT

Atomic and quartz oscillators

Caesium, rubidium, chip-scale atomic and oven-controlled quartz oscillators chosen by holdover needs.

We design, integrate and maintain.

ITU-T G.8272.1 (ePRTC with autonomous time reference) · ITU-T G.811.1

Spectrum, timing and PNT

Holdover design

Keeping time within budget for hours or days when GNSS is lost.

We design and operate.

ITU-T G.8273.2 (holdover performance) · ITU-T G.8272.1

Spectrum, timing and PNT

Timing performance monitoring

Measuring time error, MTIE and TDEV across the network to catch degradation early.

We operate and maintain.

ITU-T G.810 (definitions and terminology) · ITU-T G.8260 (time and phase metrics)

Spectrum, timing and PNT

Traceability to national time scales

Linking network time to UTC through a national metrology institute.

We design and support.

BIPM Circular T · UTC(NRC) (National Research Council Canada)

Spectrum, timing and PNT

Edge and distributed grandmasters

Grandmaster functions at cell sites and edge nodes to shorten timing chains.

We design, integrate and deploy.

ITU-T G.8275.1 · O-RAN WG4 CUS-Plane (LLS-C3 topology)

02Architecture

Where it sits, and what it speaks.

Grandmasters and holdover draws on the spectrum below; the highlighted layers carry this area, and the protocol functions it speaks are marked.

Spectrum regimes and access

9

Spectrum monitoring and interference management

8

GNSS positioning and augmentation

9

Packet timing: PTP, SyncE and NTP

10

Grandmasters, reference clocks and holdover

7

Resilient PNT

9

Interference, jamming and spoofing detection

7

01Jiunge Identity, attestation quote, signed policy.

02Admit Admitted for a stated scope, nothing wider.

03Eleza What, where, how and by whom, with calibration.

04Time One clock across the grid, with its error bound.

05Observe Every value with quality and provenance.

06Qualify Tested against the specification, state on record.

07Federate Signed exchange across grids and trust domains.

08Orchestrate Software and configuration by signed plan.

09Correct A correction marks what depends on it and publishes a new version.

10Exchange Products reach people and applications through versioned interfaces.

11Prove Signed proof receipts that an independent verifier can check.

12Exit and decommission An open exit path, and a record that closes.

03On the grid

Every site joins one observing grid.

The open networks on the grid today, over real relief and the geodesic cells we count them into, filtered to the solid earth domain this area serves. A site built here enrols into the same grid.

The observing grid

  1. Open solid earth instruments on the observing grid.

04In the field

Where this runs, sector by sector.

Deployment scenarios from the sector research that rely on grandmasters and holdover.

Transport

Maritime and port met-ocean with vessel tracking

Wave buoys and a receiver for vessel position broadcasts.Government and public safety

National GBON surface and upper-air network

WMO-grade stations reporting through WIS 2.0, funded through the systematic-observations financing pathway.Government and public safety

Wildfire camera network and fire-weather stations

Camera towers with edge inference and co-located fire-weather stations, utility- or agency-funded.Government and public safety

Urban street-flood sensor network

Open-hardware depth sensors with open data and alerts to emergency management.Government and public safety

Alerting integration with the Common Alerting Protocol and cell broadcast

Software-heavy: sensor triggers feed an alert origination tool; the alert authority keeps every decision.Government and public safety

Deployable communications and sensing for incident command

A cell on wheels with satellite backhaul, mesh telemetry and environment nodes at the incident base.

05Open and enterprise

Open by default. Enterprise by contract.

The open counterpart lives on the main site for anyone to read and run. The enterprise service is designed, deployed and operated with you, under contract.

Open, on the main site

  • Timing budget method
  • Reference station metadata rules

Enterprise, on this site

  • Timing and positioning integrity
  • Reference network design and operation
  • Holdover engineering

06The rest of the line

Positioning, navigation and timing, area by area.

Positioning, navigation and timing

GNSS reference networks

Continuously operating stations, tied to the geodetic frame.Positioning, navigation and timing

Time distribution

PTP, SyncE and NTP, engineered to the budget.Positioning, navigation and timing

Resilient PNT

Several sources, cross-checked, one trusted solution.Positioning, navigation and timing

Interference detection

Jamming and spoofing found, located and logged.

Bring us the site.

Survey, design, deployment and operation for grandmasters and holdover. The form names who receives your details.

Talk to usAsk for a quote
Skip to content

Reference clocks that keep time when the sky goes dark.

Grandmasters and holdover, inside Positioning, navigation and timing: PRTC and enhanced PRTC, primary reference clocks for frequency, atomic and quartz oscillators, holdover design and more. Every item is traced to its specification, from ITU-T G.8272 (PRTC) to ITU-T G.8272.1 (ePRTC), and runs on the open Observatory Protocol.

01Ni nini

02Architecture

Where it sits, and what it speaks.

03On the grid

04In the field

Where this runs, sector by sector.

05Open and enterprise

Open by default. Enterprise by contract.

The open counterpart lives on the main site for anyone to read and run. The enterprise service is designed, deployed and operated with you, under contract.

Open, on the main site
    Enterprise, on this site
      06The rest of the line

      Bring us the site.

      Talk to us