/

/

The people who design, build and run observation in this industry: engineers, operators, researchers and the communities the systems serve.

Reference design, drawn to scale · drag to turn

1. Infrastructure · Community

   Assets that report their own condition

   Structural and ground-movement monitoring for bridges, dams, tunnels and slopes, drone survey and 3D twins for construction, satellite interferometry over whole networks, and deployable kits for the site before the permanent network exists. Needs: displacement and deformation, vibration and strain, ground movement over wide areas, as-built geometry and site connectivity during construction.

2. Community

   Street flood observatory

   Ultrasonic depth sensors on poles report street-level water depth as open data and alerts. Built with cities, emergency management agencies and universities, and open to participation. Volunteers and local partners install, host and read stations alongside our crews; their data carries the same metadata and quality flags as every other source.

3. Community

   Hybrid air-quality observatory

   A few reference analysers and many low-cost nodes, with co-location calibration and an open-data feed. Built with cities, public-health units, school districts, and open to participation. Volunteers and local partners install, host and read stations alongside our crews; their data carries the same metadata and quality flags as every other source.

4. What must be measured

   Infrastructure: what must be measured

   Displacement and deformation, vibration and strain, ground movement over wide areas, as-built geometry and site connectivity during construction. Each is measured by instruments sited to recognised practice, read by a base node that stamps, checks and signs every value. The quality flag and the provenance travel with the data, so a decision can be traced to the reading behind it.

5. How it works

   From instrument to record, in one chain

   An instrument reads; the base node checks the value, stamps time and place, signs it and sends it over the link the site has: cellular, LoRaWAN, private 5G or satellite. The edge verifies the signature before admitting it, and the core catalogues it with its metadata, quality flag and licence.

6. Trust

   Every node proves what it is

   A node joins only after its hardware root of trust answers an attestation challenge. Keys stay in secure hardware, software arrives signed, and every reading carries a signature, so its origin can be checked by anyone downstream without asking us.

7. Time and place

   Every reading carries when and where

   Readings are stamped against a disciplined clock, from satellite time or a PTP grandmaster, together with the station position and its siting record. When time or position is degraded, the record says so instead of hiding it, and every analyst downstream sees the same warning.

8. How it scales

   One base unit, repeated

   A programme starts with one base node and the instruments it reads. A station adds power and radio, a site adds a relay, a fleet repeats the proven site across many places, and a network federates fleets through edge and core. Capacity grows by adding units, never by replacing what works.

9. Updates

   Updates in rings, with rollback

   Software and configuration reach the fleet in rings: a canary site first, then a few, then all, each ring gated on health and data completeness. A failed gate stops the wave and returns each node to its last good release, without a site visit.

10. Operations

    Every node watched, every incident closed

    The operations console shows every node with its state, its plan and its evidence. Alerts arrive with their data and a runbook; acknowledging one opens a work order, and an incident closes only when the cause is recorded and the fix verified.

11. Failure and recovery

    When a node fails, the fleet knows first

    When a node goes silent or a sensor drifts, the node buffers its data, fails over to a second link where one exists, and the alert carries the evidence a responder needs. Nothing is lost and nothing is counted twice.

12. What you get

    Structural and ground-movement monitoring

    GNSS, InSAR, tilt, strain and fibre sensing on bridges, dams, slopes, tailings and pipelines, with alert thresholds set by the owner. Delivered as managed service and data licence, for infrastructure, mining and pipeline operators, transport agencies. Scale: Asset portfolios. Service levels are written as numbers you can measure on your own dashboard.

    Talk to sales

13. Next step

    Plan an infrastructure deployment

    Tell us the sites, the measurements and the people who will use them. We reply with a design and a scope for infrastructure. An engineer replies with a survey proposal and a scope, and the plan grows from one site to the network you need, at your pace.

    Plan a deploymentOpen the StudioRead the stories

01Why a community

Observation is built by many hands.

Engineers, operators, researchers and residents each see a part of the system. The community puts the parts in one place.

01

Join

One account for every community, every platform and the NXS Observatory app.Create account →

02

Contribute

Methods, templates, field notes and data, reviewed in the open and credited to the people who made them.What is open →

03

Build together

Groups form around use cases, regions and technologies, proposed by members.Use cases →

02Code of conduct

One standard for every space we host.

• RespectDisagree with ideas, never with people. No harassment, in any form.
• EvidenceClaims carry their source. Measurements carry their method.
• CreditWork is credited to the people who did it, under the licence they chose.
• SafetyNo instructions that put people, sites or networks at risk.
• PrivacyNo one’s personal data is posted without their consent.
• AuthorityOfficial warnings and decisions stay with the bodies that hold them.

Bring us the site.

Survey, design, deployment and operation for infrastructure. The form names who receives your details.